The Defense Compliance ReportCMMC 2.0 & the Defense Industrial Base

CMMC Compliant CAD and PLM Software: SolidWorks, Autodesk, Onshape, PTC and Siemens for CUI

By The Defense Compliance Report Editorial Team · Last verified: November 20, 2026

General information for the defense industrial base, not legal, contractual, export control or compliance advice. Not affiliated with DoD, the Department of War, NIST, The Cyber AB, the FedRAMP program, Dassault Systèmes, Autodesk, PTC, Siemens, GoEngineer, Project Hosts or any government agency. Your contract and your own scoping decisions control what applies to you.

Short answer: No CAD, PDM or PLM product is "CMMC compliant" by itself. What decides whether a tool can hold controlled drawings is where the files live. Desktop CAD such as SOLIDWORKS, Inventor, Creo or NX with a vault on your own server can be used for CUI, but then the workstations and vault server are CUI Assets that need all 110 Level 2 requirements. A cloud CAD or PLM service that stores CUI must be FedRAMP Moderate Authorized on the FedRAMP Marketplace or prove FedRAMP Moderate equivalency under DoD's December 2023 memo. On November 20, 2026, the Marketplace listed PTC Cloud Services (Windchill and Windchill+) as FedRAMP Authorized at Moderate and the Project Hosts GSS One boundary, which Siemens says hosts Siemens Federal Cloud with Teamcenter, at High. PTC launched Onshape Government Federal on November 19, 2026 with a vendor-stated "FedRAMP Moderate Equivalent" attestation. Autodesk says Fusion is not FedRAMP authorized and not ITAR compliant, and we found no Marketplace listing for Dassault's 3DEXPERIENCE cloud. CMMC Phase II is still suspended, but Level 2 (Self) assessments and DFARS 252.204-7012 still apply.

Who this page is for

  • Machine shops and fabricators that receive controlled drawings and models from primes and open them in desktop CAD or CAM.
  • Engineering and design firms choosing between a PDM vault on their own server and a cloud CAD or PLM service.
  • Aerospace and defense manufacturers moving PLM to the cloud who need to know which offerings can hold CUI and export-controlled data.
  • IT managers and MSPs who have to scope CAD workstations, vault servers and vendor clouds in a Level 2 self-assessment.

If you only receive Federal Contract Information and never controlled technical data, Level 1 applies and most of this page won't. Whether your drawings are CUI in the first place is covered in the CMMC for machine shops guide and the CUI marking requirements page.

Why CAD files are often the CUI

DFARS 252.204-7012 defines "technical information" with examples that include "research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports." Controlled technical information is technical information "with military or space application" that would carry distribution statements B through F under DoD Instruction 5230.24 (DFARS 252.204-7012).

That means the systems you use to open, edit, store and share models are often the center of your CMMC boundary, alongside email and file shares.

Is your CAD system in scope for CMMC?

CMMC scopes systems by what they do with CUI, using the asset categories in 32 CFR 170.19. Product names don't matter. Data paths do.

CAD-related system — Typical asset category — What applies
CAD-related systemTypical asset categoryWhat applies
Engineering workstation that opens controlled models or drawingsCUI AssetAll 110 Level 2 requirements
PDM or PLM vault server on your premises holding controlled filesCUI AssetAll 110 requirements
CAM programming PC that stores toolpaths derived from controlled modelsCUI AssetAll 110 requirements
Cloud CAD, PDM or PLM service that stores CUIExternal cloud service providerFedRAMP Moderate Authorized or equivalent (32 CFR 170.16(c)(2))
Viewer or markup PC that opens controlled drawingsCUI AssetAll 110 requirements
SQL server, file server or backup target behind the vaultCUI AssetAll 110 requirements
Endpoint management, logging or MFA system that protects the CAD environmentSecurity Protection AssetRequirements relevant to the security functions it provides
CAD PC on the same network configured to handle only commercial workContractor Risk Managed AssetDocumented in inventory, SSP and diagram; policies and controls must keep CUI off it
CNC controller, CMM or test rig that receives programs from a CUI systemSpecialized AssetInventory, SSP, network diagram and how you manage them
CAD station physically or logically separated from CUI systemsOut of scopeMust be unable to process, store or transmit CUI

The last two rows are where small shops save the most effort. Splitting controlled work onto a few machines and a separate vault keeps the rest of engineering out of the boundary. The CMMC scoping guide and CMMC scope reduction explain the options, and the CUI data flow diagram guide shows how to draw the path from a prime's portal to the shop floor.

There is no "CMMC certified CAD software"

CMMC certifies companies, not software. A CAD vendor can earn a FedRAMP authorization for a cloud service, publish a FedRAMP Moderate equivalency body of evidence, or ship features such as MFA, role permissions and audit logs. Those make a tool usable for CUI. Your configuration and evidence make it compliant.

GoEngineer, a Dassault Systèmes reseller, puts it this way for SOLIDWORKS PDM and 3DEXPERIENCE: "The software itself is neither compliant nor noncompliant, but it can be implemented to support CMMC compliance initiatives, given the proper environment and processes" (GoEngineer).

When a vendor says a product "aligns with CMMC" or "supports CMMC," read that as "has features you can use." The tests below decide whether you can put CUI in it.

Desktop CAD vs. cloud CAD: the deciding question

The first question isn't which brand you use. It's where the controlled files sit.

Deployment — Where controlled files live — Who carries the requirements — Cloud rule applies?
DeploymentWhere controlled files liveWho carries the requirementsCloud rule applies?
Desktop CAD with local filesEngineer's workstationYou, for every workstationNo
Desktop CAD with an on-premises PDM vaultWorkstations plus your vault serverYou, for workstations and serversNo
Desktop CAD with PDM hosted in your own cloud tenant (for example AWS GovCloud or Azure Government)Your cloud servers plus workstationsYou, plus the cloud platform's FedRAMP authorization for the infrastructureYes, for the cloud platform
SaaS CAD, PDM or PLM run by the vendorThe vendor's cloudShared: the vendor's FedRAMP status plus your configurationYes, for the SaaS service
Desktop CAD that syncs to the vendor's cloudWorkstations and the vendor's cloudSharedYes, for the vendor cloud

Desktop CAD keeps the cloud question off the table but puts every workstation, server and backup in scope. SaaS CAD can shrink your own infrastructure, but only if the service meets the cloud rule. The last row is easy to miss. A desktop product whose files sync to the vendor's cloud is a cloud product for CMMC purposes.

The cloud test: FedRAMP Moderate or equivalent

Two rules decide whether a cloud CAD, PDM or PLM service can store CUI.

  • DFARS 252.204-7012(b)(2)(ii)(D). If you use an external cloud service provider to store, process or transmit covered defense information, you must "require and ensure" that it "meets security requirements equivalent to those established by the Government for the Federal Risk and Authorization Management Program (FedRAMP) Moderate baseline" and follows the clause's incident reporting, malware, media preservation, forensic access and damage assessment requirements.
  • 32 CFR 170.16(c)(2). For a Level 2 self-assessment, a cloud service provider that holds CUI must be FedRAMP Authorized at the Moderate baseline or higher in the FedRAMP Marketplace, or meet FedRAMP Moderate equivalency under DoD policy (32 CFR 170.16).

DoD's FedRAMP Moderate Equivalency memo (December 21, 2023) explains the two paths:

Path — What the vendor must show — What you must do
PathWhat the vendor must showWhat you must do
FedRAMP Moderate Authorized (or High) on the MarketplaceThe Marketplace listingConfirm the listing covers the product you use, get the customer responsibility matrix, configure your side
FedRAMP Moderate equivalent100 percent compliance with the latest Moderate baseline, assessed by a FedRAMP-recognized 3PAO, with a full body of evidence (SSP, SAR, POA&M, scan results and more) and no open POA&M items from the 3PAO assessmentValidate the body of evidence yourself, give the customer responsibility matrix to assessors, and accept that you report if the service is compromised

The memo says Marketplace-authorized offerings "can be leveraged without further assessment." It also says "The onus is on the contractor to validate the BoE" for an equivalent offering. A vendor's press release saying "FedRAMP Moderate Equivalent" is where your review starts, not where it ends.

Status words matter. The Marketplace data we checked uses four statuses: FedRAMP Authorized, Agency In Process, FedRAMP In Process and FedRAMP Ready. Only Authorized meets the first test in 170.16(c)(2). "FedRAMP compliant" or "FedRAMP aligned" on a marketing page is not a Marketplace status. The CMMC vs FedRAMP page explains how the two programs fit together.

CAD, PDM and PLM cloud status on November 20, 2026

We checked the FedRAMP Marketplace data (last changed November 16, 2026) and each vendor's own documentation on November 20, 2026. Statuses change, so open the Marketplace listing before you sign.

FedRAMP Authorized on the Marketplace

Offering — What it covers — Marketplace status — Authorized — Notes
OfferingWhat it coversMarketplace statusAuthorizedNotes
PTC Cloud ServicesWindchill and Windchill+ PLM, plus service lifecycle managementFedRAMP Authorized, ModerateDecember 1, 2017Listing says it supports CUI and ITAR and EAR data; agency authorizations from DISA and the U.S. Air Force
GSS One - AWS (Project Hosts)Platform boundary in AWS GovCloud; Siemens says Siemens Federal Cloud with Teamcenter runs inside itFedRAMP Authorized, HighApril 6, 2026Siemens' page is aimed at federal agencies; confirm contractor eligibility with Siemens Government Technologies
Autodesk for GovernmentAutodesk Docs for Government and BIM Collaborate Pro for Government (architecture, engineering and construction)FedRAMP Authorized, ModerateAugust 14, 2024Not Fusion, Inventor or Vault; terms exclude ITAR data
Bentley for GovernmentProjectWise and OpenGround (infrastructure engineering)FedRAMP Authorized, ModerateMarch 31, 2026Infrastructure and civil work, not mechanical CAD
Rescale PlatformCloud high performance computing for simulation and digital engineeringFedRAMP Authorized, ModerateJanuary 31, 2022Relevant if you run FEA or CFD on controlled models in the cloud

Vendor-stated FedRAMP Moderate equivalent (not on the Marketplace)

Offering — Vendor statement — Hosting — What to ask for
OfferingVendor statementHostingWhat to ask for
Onshape Government Federal (PTC)"FedRAMP Moderate Equivalent attestation based on NIST SP 800-53 Rev. 5" (PTC, November 19, 2026)AWS GovCloud (US)The full body of evidence listed in DoD's equivalency memo, the 3PAO's name and the customer responsibility matrix
Arena PLM for AWS GovCloud (PTC)"FedRAMP Moderate Equivalent" (same PTC release)AWS GovCloudSame as above

Not authorized for CUI in the vendor's cloud

Offering — What we found — Source
OfferingWhat we foundSource
Autodesk Fusion"Autodesk Fusion is not currently FedRAMP authorized" (May 13, 2026) and "currently is not ITAR compliant, even in offline mode" (April 9, 2026)Autodesk support, FedRAMP; Autodesk support, ITAR
3DEXPERIENCE public cloud (Dassault Systèmes)No Marketplace listing found; GoEngineer says the public cloud "does not support CMMC compliance Level 2, because it is not suitable for CUI storage due to FedRAMP status"GoEngineer; FedRAMP Marketplace
Teamcenter X and other commercial PLM SaaSNo Marketplace listing found under Siemens other than the Siemens Federal Cloud arrangement aboveFedRAMP Marketplace

"No listing found" means we searched the Marketplace data for the vendor and product names and found nothing on November 20, 2026. A vendor could still hold a body of evidence for equivalency. If you want to use a tool from the last table for CUI, ask the vendor in writing for a FedRAMP Moderate authorization or an equivalency body of evidence. If neither exists, keep CUI out of it.

SOLIDWORKS and CMMC

SOLIDWORKS is installed desktop software, so a workstation that opens controlled models is a CUI Asset. The questions are where the vault lives and whether anything syncs to Dassault's cloud.

SOLIDWORKS setup — CMMC position — Main work
SOLIDWORKS setupCMMC positionMain work
SOLIDWORKS desktop, files on local drives or a file shareWorkstations and share are CUI AssetsFull Level 2 controls on each machine, FIPS-validated encryption at rest and in transit
SOLIDWORKS PDM Professional on your serverVault server, SQL server and clients are CUI Assets; you carry all 110 requirementsFolder permissions, Active Directory login with MFA, audit trail, encryption, backups
SOLIDWORKS PDM StandardSame scope, but GoEngineer says Standard has no Active Directory integration and "must be upgraded to Professional to support CMMC Compliance"Plan the upgrade or another vault
3DEXPERIENCE on premisesYou carry all 110 requirements for the platform serversHardening, MFA, collaborative space permissions, cache cleanup on clients
3DEXPERIENCE public cloudNo FedRAMP listing found; GoEngineer says it is not suitable for CUIKeep controlled models off it

GoEngineer's guide also notes these SOLIDWORKS PDM details, all stated by the reseller, not by DoD (GoEngineer):

  • No native MFA. PDM relies on Windows Active Directory login, so MFA has to be enforced at the Windows login.
  • Folder-level permissions. Permissions are typically set on folders, so CUI belongs in a restricted folder structure. "All Users" with read access to the whole vault fails least privilege.
  • Encryption between client and server. GoEngineer says SOLIDWORKS PDM 2025 is required because of the change to AES-128 for server-client encryption. Algorithm alone doesn't satisfy 3.13.11, so check which module does the work.
  • Audit trail. PDM keeps history of changes, comments and workflow approvals.
  • Local cache. PDM doesn't automatically clear CUI from client cache folders when a laptop leaves or is retired, so IT has to do it.

For a 3DEXPERIENCE or SOLIDWORKS cloud connector, treat any feature that uploads files to Dassault's cloud the same way as the public cloud: off for controlled work unless Dassault gives you an authorization or equivalency evidence for that service.

Autodesk and CMMC

Autodesk has three different stories, and they get mixed up.

Autodesk product — Where files live — CMMC position on November 20, 2026
Autodesk productWhere files liveCMMC position on November 20, 2026
Inventor, AutoCAD and other desktop products with local files or an on-premises Vault serverYour workstations and serversUsable for CUI with full Level 2 controls on the machines and vault
Autodesk FusionAutodesk's cloudAutodesk says it is not FedRAMP authorized and not ITAR compliant, even in offline mode. Keep controlled work off it.
Autodesk Docs for Government and BIM Collaborate Pro for GovernmentAutodesk for Government cloudFedRAMP Authorized at Moderate since August 14, 2024, but aimed at architecture, engineering and construction projects and excluded for ITAR data

The Autodesk for Government terms (effective February 2, 2026) are blunt. The offerings "are not suitable for storage of International Traffic and Arms Regulation (ITAR) export-controlled information or data, or any other export controlled information or data to which access is restricted to U.S. Persons," and data "may not reside exclusively in the United States" (Autodesk for Government Special Terms, PDF). Autodesk's own FAQ says current users are teams working on building projects for the General Services Administration, which holds the ATO (Autodesk for Government).

On February 12, 2026, Autodesk announced it would seek FedRAMP Moderate authorization for Autodesk Construction Cloud products and described Fusion for Government, Fusion Contributor for Government and Fusion Manage for Government as part of a "multi-year" roadmap on AWS GovCloud (Autodesk News). A roadmap isn't an authorization. Until Fusion for Government appears on the Marketplace, controlled models stay in desktop Inventor or AutoCAD with an on-premises Vault, or in another tool that meets the cloud rule.

Construction contractors using Autodesk Docs for Government for non-export-controlled CUI drawings can read the CMMC for construction contractors guide, which covers that case.

PTC: Creo, Windchill, Onshape and Arena

Among the vendors we checked, PTC has the most offerings aimed at CUI, and it announced two of them the day before we checked.

PTC product — Status on November 20, 2026 — Source
PTC productStatus on November 20, 2026Source
Creo (desktop CAD)Installed software; workstations and any vault are your CUI AssetsSame desktop rules as other CAD
Windchill and Windchill+ in PTC Cloud ServicesFedRAMP Authorized at Moderate on the Marketplace since December 1, 2017; PTC says Windchill+ is now available on Microsoft Azure GovernmentMarketplace; PTC release
Windchill SaaSPTC says DoD Impact Level 4 and 5 authorizedPTC release
Onshape Government FederalPTC says FedRAMP Moderate Equivalent attestation; not on the MarketplacePTC release; Onshape blog
Onshape Government (ITAR)Built on AWS GovCloud for ITAR and EAR; Onshape says access to Onshape Government is "only available to authorized U.S. persons employed by PTC"Onshape Government
Arena PLM for AWS GovCloudPTC says FedRAMP Moderate EquivalentPTC release

Onshape is worth a closer look for small teams because it is browser-based. Onshape says that with Government Federal, "Sensitive data stays in the Onshape Government service, not downloaded onto your employee's machines," and that you can connect your own identity provider with single sign-on and MFA, with an audit trail of "who viewed, edited, shared, or exported data" (Onshape blog). If that holds in your setup, the workstations become access devices instead of file stores, which can shrink what you have to secure. Exports such as STEP files or PDFs land back on a machine, so they still need a controlled place to go.

Two cautions. First, "FedRAMP Moderate Equivalent" puts the validation work on you under DoD's memo, so ask PTC for the full body of evidence. Second, Onshape's own FAQ still says it "has the intent to make Onshape Government meet CMMC 2.0, and will be pursuing certification as soon as accredited assessors become available." That wording is about Onshape's own status. For your assessment, the cloud rule asks for FedRAMP Moderate authorization or equivalency, not a CMMC certificate from the vendor.

Siemens: NX, Solid Edge and Teamcenter

NX and Solid Edge are installed desktop applications, so they follow the same desktop rules. Teamcenter can run on your own servers, where you carry all 110 requirements, or in Siemens Federal Cloud.

Siemens Government Technologies says Siemens Federal Cloud featuring Teamcenter earned FedRAMP Class D (High) certification and "operates within the GSS One AWS authorization boundary operated by Project Hosts," deployed in AWS GovCloud (Siemens Federal Cloud). The Marketplace lists GSS One - AWS as FedRAMP Authorized at High, authorized April 6, 2026. Siemens Government Technologies also says it holds an enterprise CMMC Level 2 certification from a C3PAO assessment (SGT press release).

Siemens' page is written for federal agencies. If you are a contractor, ask Siemens Government Technologies whether you can subscribe, and get the customer responsibility matrix for both the Siemens application and the GSS One platform.

ITAR and EAR drawings: the second test

Many controlled drawings are also export-controlled. CMMC and ITAR are separate rules, and a CAD tool has to pass both.

Question — CMMC Level 2 — ITAR / EAR
QuestionCMMC Level 2ITAR / EAR
What it protectsCUI, including controlled technical informationDefense articles and technical data (ITAR); dual-use technology and software (EAR)
Cloud ruleFedRAMP Moderate Authorized or equivalentNo FedRAMP requirement; the question is whether storage or access is an export
Who may accessAuthorized users, with least privilegeUnder ITAR, only U.S. persons unless you have authorization (22 CFR 120.62 defines U.S. person)
Encryption carve-outFIPS-validated cryptography protects CUI (3.13.11)Sending or storing unclassified technical data is not an export if it is end-to-end encrypted with FIPS 140-2 or successor modules and not sent to or stored in a proscribed country (22 CFR 120.54(a)(5); EAR parallel at 15 CFR 734.18(a)(5))

This is why Autodesk for Government can be FedRAMP Moderate Authorized and still be the wrong place for ITAR drawings: its terms exclude ITAR data and say data may not stay in the United States. It is also why Onshape offers a separate ITAR tier and says PTC-side access to Onshape Government is limited to authorized U.S. persons employed by PTC. Before you put an ITAR model in any cloud CAD tool, confirm both its FedRAMP status and its export control terms in writing. The CMMC compliance for ITAR companies guide covers the overlap in more depth.

NIST 800-171 requirements that hit CAD systems hardest

All 110 requirements apply to CAD workstations and vault servers in scope. These are the ones where CAD environments most often need specific work.

Requirement — What it says — What it means for CAD
RequirementWhat it saysWhat it means for CAD
AC.L2-3.1.1 and 3.1.2Limit system access to authorized users and to permitted transactions and functionsNamed accounts on every CAD PC; vault permissions limited to the people on the program
AC.L2-3.1.3"Control the flow of CUI in accordance with approved authorizations"Stop controlled models from syncing to personal or vendor clouds; control exports from the vault
AC.L2-3.1.5Least privilegeEngineers don't need local admin to run CAD day to day; vault admin rights stay with a few people
AC.L2-3.1.20"Verify and control/limit connections to and use of external systems"Vendor clouds, supplier portals and license servers outside your boundary must be known and limited
IA.L2-3.5.3MFA for local and network access to privileged accounts and network access to non-privileged accountsMFA for vault access over the network and for admins; for PDM tools without native MFA, enforce it at the Windows or identity provider login
SC.L2-3.13.11"Employ FIPS-validated cryptography when used to protect the confidentiality of CUI"Disk encryption on CAD PCs and vault servers and encryption for files leaving the boundary must use validated modules
SC.L2-3.13.16"Protect the confidentiality of CUI at rest"Encrypt drives on workstations, vault servers and backups
MP.L2-3.8.3"Sanitize or destroy system media containing CUI before disposal or release for reuse"Wipe or destroy CAD PC drives and old vault disks; clear local caches before reassigning laptops
MP.L2-3.8.7"Control the use of removable media on system components"USB drives used to move programs to machines need a policy and technical control
AU.L2-3.3.1Create and retain audit logsVault audit trail plus Windows logs, forwarded to a central tool
CM.L2-3.4.6Least functionalityTurn off cloud sync, sharing and telemetry features you don't need on controlled CAD machines
CM.L2-3.4.8 and 3.4.9Application allowlisting or blocklisting; control user-installed softwareEngineers can't install unapproved plug-ins, viewers or converters on CUI machines

The CMMC FIPS 140-2 requirements page explains validated modules, and the CMMC MFA requirements page covers which logins need MFA. NIST's CMVP moved FIPS 140-2 validations to the Historical list in September 2026 and supports them for existing systems only, so build new CAD environments on FIPS 140-3 modules (NIST FIPS 140-3 transition).

Sharing CAD files with primes and suppliers

CAD files move more than most CUI. A prime sends a model, you send a STEP file to a heat treater, a supplier sends back an inspection report. Every hop is a place CUI can leave your boundary.

Sharing method — CMMC position — What to check
Sharing methodCMMC positionWhat to check
Prime's own portal or PLMTheir system; your download location is in your scopeDownload only to CUI Assets
Email attachmentEmail system and every mailbox that holds the file are in scopeFIPS-validated encryption for email leaving the boundary; see CUI email encryption
Secure file sharing serviceCloud rule appliesFedRAMP Moderate status; see CMMC compliant file sharing
Light or guest users inside a cloud CAD toolCloud rule applies to the toolWho can export; how access is removed
USB drive or discMedia requirements 3.8.1 to 3.8.9 applyEncryption, marking, chain of custody
Consumer cloud links (personal Dropbox, Google Drive, WeTransfer)Fails the cloud rule unless the specific service is authorizedBlock them on CUI machines

When you send controlled drawings to a lower-tier supplier, the safeguarding requirements go with them. The CMMC flow-down requirements page explains what you must pass on and what to ask for back.

CNC machines, CMMs and shop-floor transfer

Machine controllers, coordinate measuring machines and test rigs often run old operating systems you can't patch or harden. 32 CFR 170.19 lets you document them as Specialized Assets. You record them in the inventory, SSP and network diagram and describe how you manage them, rather than forcing every requirement onto a controller.

The transfer path still matters. If programs move by USB, removable media controls apply. If they move over a DNC network, segment that network from general IT so a compromised office PC can't reach the CAM station or the vault. The CMMC network segmentation and CMMC asset inventory guides show how to document this, and the CMMC removable media policy page covers USB transfers.

How CAD gaps affect your SPRS score

A Level 2 self-assessment starts at 110 points and subtracts each NOT MET requirement's value from 32 CFR 170.24. Under 32 CFR 170.21, Conditional Level 2 (Self) status with open items requires a score of at least 88 (0.8 of 110), only 1-point items on the POA&M (plus 3.13.11 when encryption is used but isn't FIPS-validated), none from the excluded list, and closeout within 180 days.

CAD gap — Requirement — Points lost — Can it go on a POA&M for Conditional status?
CAD gapRequirementPoints lostCan it go on a POA&M for Conditional status?
Shared CAD logins or a generic "engineering" accountAC.L2-3.1.1 and AU.L2-3.3.25 + 3No
Everyone can read the whole vaultAC.L2-3.1.25No
Controlled models in Fusion, 3DEXPERIENCE public cloud or a personal cloud driveAC.L2-3.1.20 (plus the 7012 cloud rule)1No, 3.1.20 is on the excluded list
No MFA for vault or admin accessIA.L2-3.5.33 or 5No
No audit trail for the vault or CAD PCsAU.L2-3.3.15No
Engineers install any plug-in or converter they wantCM.L2-3.4.85No
Old CAD PC drives thrown out without wipingMP.L2-3.8.35No
No control over USB drives used for CNC programsMP.L2-3.8.75No
Disk encryption on, but not FIPS-validatedSC.L2-3.13.113Yes, this is the one 3-point exception
No encryption on STEP files emailed to suppliersSC.L2-3.13.115No
CAD PC drives not encryptedSC.L2-3.13.161Yes
No control of CUI flow out of the vaultAC.L2-3.1.31Yes

The SPRS score guide explains how the score is posted, and how to improve your SPRS score shows which fixes move it most.

Evidence to keep for CAD and PLM systems

Your Affirming Official signs off on the score, and DoD can still run government-led assessments during the suspension. Keep evidence you could hand over.

Evidence — What it proves
EvidenceWhat it proves
Asset inventory listing every CAD PC, CAM PC, vault server and cloud CAD service with its asset categoryYou know what's in scope
Data flow diagram from the prime's portal through CAD, CAM and the shop floorYou know where CUI goes
Vault permission export and the list of people on each controlled programLeast privilege is enforced
MFA configuration for vault, identity provider and admin accessPrivileged and network access use MFA
FedRAMP Marketplace listing or equivalency body of evidence for each cloud CAD, PDM or PLM serviceThe cloud rule is met
Vendor customer responsibility matrix, referenced in your SSPYou know which controls are yours
Export control terms or written confirmation for ITAR data in any cloud toolExport rules are met
Disk encryption status and the validated module in use on each CAD machineData at rest is protected with FIPS-validated crypto
Vault audit log sample and log forwarding configurationLogs exist and are reviewed
Media sanitization records for retired CAD drivesOld drives didn't leak CUI

The CMMC Level 2 documentation checklist shows where these fit in your SSP, and the CMMC shared responsibility matrix page explains how to use a vendor's matrix.

Step by step: making your CAD environment CMMC ready

  1. Find every place controlled models live. Workstations, vaults, file shares, email, USB drives, backups and any vendor cloud.
  2. Decide desktop or cloud. Keep desktop CAD with an on-premises vault, move to a cloud service that meets the cloud rule, or combine them.
  3. Check each cloud service. Open its FedRAMP Marketplace listing or get the equivalency body of evidence. If neither exists, move the CUI out.
  4. Check export terms. If you have ITAR or EAR data, confirm the tool's U.S. person access and storage terms.
  5. Split controlled from commercial work. Separate vaults or folders, separate machines where you can, and only program staff in the controlled ones.
  6. Lock down the workstations. Named accounts, no daily local admin, FIPS-validated disk encryption, allowlisted software, cloud sync off.
  7. Add MFA. At the vault, the identity provider or the Windows login, plus admin accounts.
  8. Turn on and forward logs. Vault audit trail and Windows logs to a central tool; see SIEM for CMMC.
  9. Control the shop-floor path. Document CNC and CMM equipment as Specialized Assets and control USB or DNC transfer.
  10. Document and re-score. Update the SSP, data flow diagram, inventory and POA&M, then re-score against all 110 requirements.

What the CMMC suspension changes for CAD software

The suspension changed the assessment type. The CAD requirements stayed the same. On July 13, 2026 the Department of War suspended the move to CMMC Phase II. The implementing memo says requiring activities may include only CMMC Level 1 (Self) or Level 2 (Self) and may not designate Level 2 (C3PAO) or Level 3 (DIBCAC) (suspension memo, PDF). The DoD CIO CMMC page still says that "All Phase I self-assessment requirements remain firmly in place" and that the suspension "does not eliminate the requirement for companies to protect information in accordance with DFARS clause 252.204-7012." Class Deviation 2026-O0025, Revision 3, dated September 3, 2026, tells contracting officers to work with requiring activities to remove or revise CMMC requirements to match. As of November 20, 2026, no restart date has been announced. CMMC phases tracks the status.

Item — Status on November 20, 2026 — Source
ItemStatus on November 20, 2026Source
Level 2 (Self) in new contractsAllowedSuspension memo; Class Deviation 2026-O0025, Revision 3
Level 2 (C3PAO) designationsNot allowed during the suspensionSuspension memo
All 110 requirements for CAD systems that handle CUIStill part of Level 232 CFR 170; NIST SP 800-171 Rev 2
FedRAMP Moderate rule for cloud CAD, PDM and PLM holding CUIStill in forceDFARS 252.204-7012; 32 CFR 170.16
FIPS-validated cryptography for CUIStill requiredNIST SP 800-171 Rev 2, 3.13.11
Government-led assessmentsMay still happenDoD CIO CMMC page

Onshape says its Government service was designed following NIST SP 800-171 Revision 3, but 32 CFR 170 is built on Revision 2 and DoD says it is enforcing Revision 2 during the suspension. Score your CAD environment against Revision 2 unless your contract says otherwise. See NIST 800-171 Rev 2 vs Rev 3.

What it costs

CAD and PLM pricing depends on seat count, product tier, government cloud premiums and how much data you migrate, and none of the vendors we checked publish government-tier prices on the pages we used. We don't quote prices we can't source. These are the drivers that move the number.

Cost driver — Why it matters
Cost driverWhy it matters
Government cloud tier vs. commercial tierFedRAMP and GovCloud offerings are separate products from commercial plans
Upgrading a vault editionGoEngineer says SOLIDWORKS PDM Standard must move to Professional for Active Directory login, which is where MFA gets enforced
Migrating models out of a non-authorized cloudMoving Fusion or 3DEXPERIENCE cloud data takes engineering time and retesting
Separate controlled and commercial vaultsMore administration, but less of the company in scope
FIPS-validated disk encryption and MFA on CAD PCsLicensing and setup per machine
Central logging and EDR for CAD machinesPer-endpoint or per-volume fees
SSP, data flow diagram and evidenceInternal hours or consultant time

For the assessment itself, DoD's final rule estimates $34,277 for a small entity's Level 2 self-assessment and affirmation and $37,196 over three years (CMMC final rule, 89 FR 83092). Those figures assume the requirements are already in place, so CAD remediation costs extra. The CMMC enclave cost page compares the cost of walling off engineering in an enclave.

Common CAD mistakes with CMMC

  • Assuming a big brand means compliant. No CAD product is CMMC certified. Check where the files live.
  • Putting one defense job in Fusion. Autodesk says Fusion isn't FedRAMP authorized or ITAR compliant, even offline.
  • Reading "FedRAMP Moderate authorized" on Autodesk's site as covering Fusion or Inventor. It covers Docs for Government and BIM Collaborate Pro for Government.
  • Treating a vendor's "FedRAMP Moderate Equivalent" claim as finished. DoD's memo puts the burden of validating the body of evidence on you.
  • Leaving 3DEXPERIENCE or other cloud connectors on. A desktop tool that syncs to a vendor cloud brings that cloud into scope.
  • Giving everyone read access to the whole vault. It fails least privilege at 5 points.
  • Running SOLIDWORKS PDM Standard without MFA. GoEngineer says Standard lacks Active Directory integration.
  • Forgetting the local cache. Models stay on laptops after a project ends unless IT clears them.
  • Emailing STEP files unencrypted. Every supplier hop needs FIPS-validated encryption or an authorized sharing service.
  • Leaving CNC controllers off the inventory. Document them as Specialized Assets instead.

Which provider category fits

If you need — Provider category — Start here
If you needProvider categoryStart here
A scope decision for CAD PCs, vaults and vendor clouds, plus SSP languageReadiness consultant or RPOCMMC consultant
Ongoing patching, MFA, encryption and logging for engineering machinesManaged service providerCMMC for IT MSPs
A ready-made CUI environment where engineers can work on controlled modelsCUI enclave providerCUI enclave providers
Vault servers in a government cloud tenantCloud or MSP partner with GovCloud or Azure Government experienceAWS GovCloud for CMMC
Help closing open items after a self-assessmentRemediation providerCMMC remediation services

The CMMC provider categories page explains how these differ. If you run an engineering or design firm, the CMMC for engineering firms guide covers the rest of your boundary, and CMMC for aerospace suppliers covers prime flow-downs. Find My CMMC Path is free; we may receive a referral fee from providers, and providers can't pay for placement in a recommendation.

CMMC compliant CAD software: FAQ

Is SOLIDWORKS CMMC compliant?

SOLIDWORKS desktop can be used for CUI, but no software is CMMC compliant by itself. The workstations and any PDM vault become CUI Assets that need all 110 Level 2 requirements. GoEngineer, a Dassault reseller, says SOLIDWORKS PDM Professional supports Active Directory login with MFA at Windows, while PDM Standard must be upgraded, and that the 3DEXPERIENCE public cloud is not suitable for CUI.

Is Fusion 360 CMMC compliant?

Not for CUI in its cloud. Autodesk's support site says "Autodesk Fusion is not currently FedRAMP authorized" (May 13, 2026) and "currently is not ITAR compliant, even in offline mode" (April 9, 2026). Autodesk has announced Fusion for Government as a multi-year roadmap item, not an authorized product.

Is Onshape FedRAMP authorized?

Not on the Marketplace as of November 20, 2026. PTC launched Onshape Government Federal on November 19, 2026 with a vendor-stated "FedRAMP Moderate Equivalent attestation." Under DoD's equivalency memo, you must get and validate the body of evidence before relying on it for CUI.

Which PLM software is FedRAMP authorized?

On November 20, 2026, the Marketplace listed PTC Cloud Services, which covers Windchill and Windchill+, as FedRAMP Authorized at Moderate, and the Project Hosts GSS One - AWS boundary, where Siemens says Siemens Federal Cloud with Teamcenter runs, at High. PTC also says Arena PLM for AWS GovCloud is FedRAMP Moderate Equivalent.

Can I use Autodesk for Government for defense drawings?

Only for CUI that isn't export-controlled, and it's built for architecture, engineering and construction projects. Its terms say it is "not suitable for storage of" ITAR data and that data "may not reside exclusively in the United States." It covers Autodesk Docs for Government and BIM Collaborate Pro for Government, not Fusion or Inventor.

Do CAD workstations need FIPS encryption?

Yes, when encryption protects CUI. NIST SP 800-171 requirement 3.13.11 requires FIPS-validated cryptography, and 3.13.16 requires protecting CUI at rest. Encryption that isn't validated costs 3 points; no encryption costs 5.

Is a CAD license server in scope?

It depends on what it can reach. A license server that only exchanges license data and can't access CUI systems may be out of scope or a Contractor Risk Managed Asset if you document it. If it sits on the same network as CUI Assets without separation, it is likely in scope. Get in writing what the license check sends.

Do I need a CUI enclave for CAD?

Not always. An enclave makes sense when only part of your engineering team handles controlled work. Desktop CAD on a few hardened machines with a separate vault, or a cloud CAD service that meets the cloud rule, can also work. Compare options on the CUI enclave providers and CMMC managed enclave pages.

Are CNC machines in scope for CMMC?

CNC controllers that receive programs from CUI systems are usually documented as Specialized Assets under 32 CFR 170.19. You list them in your inventory, SSP and network diagram and describe how you manage them, and you control how programs reach them.

Does the CMMC suspension mean I can wait on CAD changes?

No. The suspension stopped Level 2 (C3PAO) and Level 3 designations, but Level 2 (Self) assessments, annual affirmations and DFARS 252.204-7012 still apply, including the FedRAMP Moderate rule for cloud services that hold covered defense information.

What we verified

On November 20, 2026 we opened each source linked on this page: the DoD CIO CMMC page, the July 13, 2026 suspension memo, Class Deviation 2026-O0025 Revision 3 (a Revision 4 URL returned 404), 32 CFR 170.16, 170.19, 170.21 and 170.24 on eCFR (title 32 current through November 18, 2026; part 170 last amended December 16, 2024), DFARS 252.204-7012, 7019, 7020 and 7021 clause dates on acquisition.gov, DoD's FedRAMP Moderate Equivalency memo, the FedRAMP Marketplace data (last changed November 16, 2026) for each listing in the tables, PTC's November 19, 2026 release, Onshape's government page and November 19, 2026 blog post, Autodesk's Fusion support articles, Autodesk for Government page and Special Terms, Autodesk's February 12, 2026 announcement, Siemens Government Technologies' Federal Cloud page and press release, GoEngineer's CMMC guide, 22 CFR 120.54 and 120.62, 15 CFR 734.18, NIST SP 800-171 Revision 2, NIST's FIPS 140-3 transition page and the CMMC final rule cost estimates. "No listing found" entries come from searching the Marketplace data for vendor and product names. Vendor statements are reported as the vendor's claims. We did not test any CAD product, and Marketplace listings, vendor terms and program status can change.

Sources